Search results

  1. M

    Votol EM-100 & EM-150 controllers

    Got my EM-150SP/2 and QS 138 v3 running with a base config file and changing motor settings. Should be -60 hall shift and exchange phase blue-green if using the physical wiring shown in my previous post. In general, are there areas of parameter tuning or operation in general to be cautious...
  2. M

    QS 138 70H with Gearbox

    Fixed this one with a base config file and adjusting my motor settings to -60, exchange phase wires blue-green, new file is attached. From your guys experience, is there an area of parameter tuning that can be risky for safe controller/motor/battery operation? Just in general I want to know...
  3. M

    QS 138 70H with Gearbox

    Is anyone on a EM-150SP/2 controller? I have my QS 138 70h v3 spinning forward with the rear wheel elevated, but once I put it on the ground it can't produce enough torque to roll the bike. Instead I hear a slight hum from the motor like it's trying. My phase wiring is shown below and motor...
  4. M

    Votol EM-100 & EM-150 controllers

    Setup: EM150-SP/2, QS 138 70h v3, only wired throttle, e-lock and CAN to computer up. Would like to jump sport mode always-on. I'm preparing for the first road test, I have the minimum port assignments and harness connections but controller is default in H gear and the wheel spins on the stand...
  5. M

    Votol EM-100 & EM-150 controllers

    Update on my issues: Display page not working - FIXED - this came alive when I unchecked CAN Enable on page 1. What's the significance of this? Is it now using some other communication protocol? Writing params seems supported in both modes. My 2 remaining start up issues are sport input not...
  6. M

    Votol EM-100 & EM-150 controllers

    Greetings all - thanks so much for everyone active and helping on this thread, it is the best Votol controller resource out there. I've had relatively good luck getting my QS 138h 70h v3 spinning with a Votol EM-150/2SP (bought March 2022) but there are a few basics I'd like to ask about before...
Back
Top