Search results

Date Relevance Most replies

  1. S

    Is the CSK30P clutch bearing required for the TSDZ2

    Hi Guys I have been working on my TSDZ2 motor for the past couple of weeks (when time permits) without much success. My problem is that when I have been riding for about 1/2 an hour and come to a bit of an incline, i stop pushing on the pedals , change down to a lower gear, then start pushing...
  2. S

    New "TSDZ2 Torque Sensor Central Motor"

    I notice that you have recently purchased the TSDZ2 mid mount system, i also purchase a bicycle complete with theTSDZ2 about 3 months ago and i have been trying to get the 6km walk function operating. I was wondering, if you have the time to see if you can get the 6km function on your bicycle...
  3. S

    TSDZ2 mid motor VLCD Display Programming & Activation

    I tried pushing the - and the i button simultaneously but that did not start the bike rolling. I rechecked the setting of the display program and this 6km function is definitely turned on. I checked all the other parameters within the program and nothing else jumps out to me that needs changing...
  4. S

    TSDZ2 mid motor VLCD Display Programming & Activation

    Battery Voltage fully charged measured with "No Load". = 41.5v I can confirm that the display that came with my installation is the larger one. Having a look at the sockets at the rear of the display, none have a USB fitting so i doubt if it would be suitable for charging a phone (Its a...
  5. S

    TSDZ2 mid motor VLCD Display Programming & Activation

    My experience has been good with this 350v system, my rides are usually about 40 - 50km. At this distance the battery capacity is excellent, dropping down to about 1/2 scale but of the two recent rides that I had I notice that the torque sensor does not appear to be as sensitive as it was when I...
  6. S

    TSDZ2 mid motor VLCD Display Programming & Activation

    Hi - thank you for sharing that topic with me, but regretfully the mid mount TSDZ2 motor has no throttle its pedal assist only,however thanks for taking the time to read my post, most appreciated
  7. S

    TSDZ2 mid motor VLCD Display Programming & Activation

    Hi Thanks very much for the assistance in explaining the activation procedure for the 6Km/h startup. I have tried your suggestion of holding the - button down for one second but that did not work, also tried the +button with the same results. I checked to ensure that the 6Km/h was turned on in...
  8. S

    TSDZ2 mid motor VLCD Display Programming & Activation

    Hi I am a newbie at requesting information on a forum and I do hope that I have adopted the correct procedure and that I have posted to the appropriate topic. I ride a Merida Big.Seven 20-D Mountain Bike fitted with the TSDZ2 Torque Sensor Central Motor with the VLCD-Display mounted on the...
Back
Top