Search results

Date Relevance Most replies

  1. A

    New "TSDZ2 Torque Sensor Central Motor"

    What grease did you use for the new blue gear? Sent from my iPad using Tapatalk Pro
  2. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I had this issue, disabling the fast cadence stop worked for me. Sent from my iPad using Tapatalk Pro
  3. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Assist level has to be greater than 0 for the virtual throttle to work. Then a long press on up button to activate it. Sent from my iPad using Tapatalk Pro
  4. A

    New "TSDZ2 Torque Sensor Central Motor"

    https://wooshbikes.co.uk/?cdkit#tsdz2 Sent from my iPad using Tapatalk Pro
  5. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have a 48v 250w Sent from my iPad using Tapatalk Pro
  6. A

    New "TSDZ2 Torque Sensor Central Motor"

    I am looking to do some maintenance on myTSDZ2, what is the best grease to use on the blue gear? Sent from my iPad using Tapatalk Pro
  7. A

    New "TSDZ2 Torque Sensor Central Motor"

    After installing the second bearing in this way, have you tried to remove the bearing. If it is installed outside the snap ring I foresee a problem removing the bearing? Sent from my iPad using Tapatalk Pro
  8. A

    New "TSDZ2 Torque Sensor Central Motor"

    Casainho Please can you confirm version 6.3 is not safe? I thought it was a later version. 6.3 is still available to download. Sent from my iPad using Tapatalk Pro
  9. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Can you please test for short circuit on the motor power leads. I have tested my motor and get no continuity between the positive + negative terminals with the battery removed.
  10. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I installed the latest firmware on the motor and display, all is working well. The up and down buttons work the wrong way round? Sent from my iPad using Tapatalk Pro
  11. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi did you try any new settings, I am also having very little assistance after calibration. Sent from my iPad using Tapatalk Pro
  12. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Have you flashed the motor with the correct version of the firmware ?
  13. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    If you connect brown to +voltage and black to ground the display should turn on.
  14. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    If not connected to the motor, I only get waiting for TSDZ2. Goes to the main screen only when connected.
  15. A

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Do you have version 19 on the TSDZ2? Have you connected the TX and RX wires on the display correctly?
  16. A

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    The motor should also be flashed with ver 20.
  17. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have just bought a 48v 250w TSDS2, that has the splitter on the speed sensor for the lights. Also wiring for the lights is included. Sent from my iPad using Tapatalk Pro
Back
Top