Search results

Date Relevance Most replies

  1. E

    CT-22 Display Brightness

    I’ll need to find another meter if this is not possible. It’s really not commercial.
  2. E

    CT-22 Display Brightness

    I read all that. Thx
  3. E

    CT-22 Display Brightness

    My CT-22 display is almost impossible to read outside in daylight. Is there an adjustment that so far has eluded me?
  4. E

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    I’m traveling now and won’t be back at it until March. Will post the results.
  5. E

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    My current dc-dc converter (96v-12v) has a common ground. This forces me to have the frame be grounded for both the 96v battery and 12v system. I suspect this is causing problems not to mention how easy it is to ground out the battery on the frame. I’m going to replace it with a dc-dc converter...
  6. E

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    I have something odd happening. Over the course of a day or two, either the trip odometer, total odometer or both seem to randomly reset to zero. Any ideas why? I have pin 1 (yellow) always wired to 96v. Pin 2 is connected to 96v, but through my switch. Pins 3 and 4 are both connected to the...
  7. E

    QSmotor/SiAecosys/Taizhou CT-22 Programming. 1 of 8

    My frequency calc for my set up is 138 assuming 60 kph. I will set the system up for MPH when done. For parameters 0 and 1 using passcode 6610, I put 138 for parameter 0. What do I put for parameter 1 -- also 138 or 60?
Back
Top