Search results

Date Relevance Most replies

  1. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    1. I did try with older versions and it behaved the same. 2. The 850c displays it behaves the same when is connected to the motor controller or not. So it seems that something in the display is wrong. Also if I turn it off from the button it saves the current state before it freezes with the...
  2. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    The LCD works fine. I've been using it this week. Right now all functions work fine only the power on/off of the display that I have issues with. I just have to disconnect it from the battery to fully turn off. I'm not sure if this is a hardware issue or software. I will try the new firmware to...
  3. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    1. It does not seem to be an issue with the LCD. Like I've said the issue seems to be with powering on the display. Right now I can turn it on only if I hold the power button while I connect the battery. There seems to be a routine or something when the display is connected to a power source and...
  4. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Unfortunately something went really wrong. I've left my bike with the screen on for 1h and when I came back and tried to turn it on I've realized that the back light was on but and it did not turn on when I pressed the power button. I've removed the battery thinking that it just got stuck and it...
  5. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Yes, I'm not sure what I should call it other then "main screen layout settings" but the main screen can be configured by double pressing the power button and on the second press it is a long press. Hope it helps! PS. I've sent you a small donation on PP. Thanks again! :-)
  6. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    I've went outside to test it and the throttle seems to be working fine. It has some kind of burst when it first engages. I've found two minor issues: 1. When pressing full throttle the warning message for temp control shows up. 2. When entering screen layout settings the hole screen switches...
  7. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    After some more tries I've managed to kind of make it work. I've changed the Motor temperature/ feature to throttle and it works but it is on/off. But I guess it is good enough for now. ;-) Once again thanks! :-D
  8. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    I've flashed the latest release 850C_v0.5.0-beta.2 but still no luck with the throttle. :-| I've also re-flashed the TSDZ2-v0.19.0.hex just to make sure. It is a shame because I really need it the throttle. We have a saying in Romania "The thing that you are afraid of you will never escape!"...
  9. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Thanks @casainho! I've tested with v0.4.2 the display was flipped and it really hard to navigate the settings. BTW I'm a developer and I'm planning to help with this project in my spare time. If you have any suggestions that I can try to fix this issues please let me know. I need the throttle...
  10. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Also in the Technical screen when I push on the throttle I see 0 value on 'ADC throttle sensor' but 'Throttle sensor' seems to show the correct values from 0 to 255 based on how I push the throttle. So it seems that the throttle is read but it is just ignored. I get the feeling that there is a...
  11. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    I've managed to flash 850c display with 850C_v0.5.0-beta.1 firmware and TSDZ2 motor controller firmware v0.19.0 (current stable version). It seems to be all good but the throttle that I can not seem to make it work. I've checked all the settings that I can find in display and all I can find is...
  12. G

    Bafang 850C color LCD, currently working for TSDZ2 motor -- Flexible OpenSource firmware

    Hello everyone! First of all I must thank you for all your work I just hope I will be able to help in the future. I'm thinking of flashing this firmware on my 850c display and TSDZ2 motor but I was curious if the throttle works. Also if I find that it dose not work for me do you know if I can...
Back
Top