Search results

Date Relevance Most replies

  1. hardmouse

    Evo 800W Electric Scooter to 2.5kW Mod

    Million thanks! :o So, did you change for both phase and sensor wires?
  2. hardmouse

    Evo 800W Electric Scooter to 2.5kW Mod

    Hi Allex, Have you experienced and problem when you use Lyen's controller to the hub motor? I got same wheel like yours but hall sensor & phase wire color seems doesn't match. Did you connect to same color to each other or different combination? Please let me know if you got any tips. Thanks :D
  3. hardmouse

    Has anyone heard a controller "BAC-082P"?

    I recently bought one of this controller from golden motor. The first attempt almost killed my battery because the priority was shorted. Luckily, the guy promise me to replace the new one and he did. However, it still shorted. I connect the RED+ wire and -Black from this controller to a LED...
  4. hardmouse

    Get the reading from ebike Throttle to Motor Controller

    Ah! I see. Thanks for advice. If the problem is at MT controller then I won't bother to use it. I am using 24V 280W brushed motor to replace the original one from e-scooter. I know how to do now. Thank a lot guys~ :D
  5. hardmouse

    Get the reading from ebike Throttle to Motor Controller

    Thank you Jeremy and d8veh. Yes, I know I am going to use only three wire from throttle. The controller I got is this: I took off the potentiometer(it says B10K on it) an measure the + - pin, it reads 9V, should I regulated down to 5+? Am I suppose to connect red wire to regulated +5V and black...
  6. hardmouse

    Get the reading from ebike Throttle to Motor Controller

    I have purchased an ebike throttle and thought it work as potentiometer, however it's not. I couldn't get correct reading as same as normal potentiometer. The reason I am asking is I'm modifying a used scooter. The old one has only on and off control and I want to replace the throttle and more...
Back
Top