Search results

Date Relevance Most replies

  1. linkdown

    Hub motor axle does not go into dropouts

    I got some torque plates laser cut from 8mm stainless steel for my MAC 10T on a GT transeo 4. I can post the design if you like. It cost me NZD45 to get the pair made. 8mm is too thick for the non drive side, I've had to run it with no washers or spacers, but 11,000km later the axle and...
  2. linkdown

    Let's get your feedback - upgrading the system to phpbb3.2.x

    Way better on mobile
  3. linkdown

    My first +50mph e-bike

    30 mph crashes hurt, definitely would not recommend it
  4. linkdown

    LCD3 Waterproof/resistant?

    I've ridden in heavy rain with that screen many times, no problems so far
  5. linkdown

    Are Middrives Really Prone To Chain Derailment?

    I've used this one very successfully, might be easier to fit around a BBS https://www.bike24.com/1.php?content=8;product=146800;menu=1000,2,228;backlink=108%7C3%7C240%2C245%7C%7C%7C%7C%7C%7C%7C%7C%7C
  6. linkdown

    Best tire + rim combination for a heavy E-bike

    I'm using Schwalbe Marathon Supreme 622-42 on an Alex DM24 for about 2500km so far on my ebike, no problems. sounds like the tyre is not seated right to me. After I inflate a tyre enough for the tube to fill the tyre, I go around the wheel and make sure that the tyre is even all the way...
  7. linkdown

    First build advice, commuter project

    Got these laser cut from 8mm stainless, attached them with JB weld and an M6 bolt
  8. linkdown

    First build advice, commuter project

    So, I went ahead with a MAC 10T, a 14s6p EM3EV small triangle and a S12SN 40A controller from BMS battery. Designed my own torque arms and had the cut from 8mm stainless steel. Nearly at the end of first part of the build so I thought I'd post up here. Currently looks something like this...
  9. linkdown

    Questions about the S-LCD3 Display ?

    The manual and userguide are linked at the bottom of the page you linked.
  10. linkdown

    worlds best mainstream unheard of factory ebike? ~$1500US

    I have a bike with this motor, I think it's the same as in the flux bike. I've ridden 6000+km and it's been pretty ok. Mine is this config, slightly different stickers though...
  11. linkdown

    Crank drive goes Shimano Alfine 8

    Looks great, how do the side covers attach to the aluminium?
  12. linkdown

    First build advice, commuter project

    $1300-$1400 should do it, right? donor bike not included.
  13. linkdown

    First build advice, commuter project

    Yeah, I think I will go back to the drawing board - ride this thing for another 4-5 months to build up some more fun budget and build what I really have in my head.
  14. linkdown

    First build advice, commuter project

    Very nice, will it get a motor? - this is my non electric project just completed Yeah, starting to look like I need a few more $$ to make this work the way I want it. I'd totally strip and mess about with the bofeili but right now I need it for the commute, it was gonna be backup while I got...
  15. linkdown

    First build advice, commuter project

    Haha, don't say that - I want a project! Yeah, I thought about this, the controller is in the bottom of the battery mount, so I guess I could swap in a 48V battery and controller. How would I know if it is likely to work though? I can't find anyone who has messed about with one of these...
  16. linkdown

    First build advice, commuter project

    I've been riding a bofeili mid drive e-bike (details here) for a few months, have racked up about 2200km and I'm itching for a project. I use my bike to commute about 16km each way every day come rain, wind or whatever. I get an average speed (including lights, etc) of 27-31km/h and I'd like...
Back
Top