EVO Scooter - C6374 LiFePo4 Build - HELP NEEDED

[pinkflozd]

Hello guys. Been following your forum for few years now. I have a EVO 800W 36V Brushed scooter. The batteries and motor are preaty worn out. So i planed to make a brushless build for some time.
i already have:
10Ah 8s LiFePo4 pack 100A Constant
100A 24V EV Controler Sensored/Sensorless - i have 1 spare if anyone iterested

I plan to buy a Alien 6374 130KV motor 3200W at 10s Sensored
My question is will this motor/battery be enought to propulse me? all togeter there will be like 105kg ... will i be able to climb hills? my goal is 40km/h on flat
I've seen a lot of scooter 80 builds but really few 63

i will keep this thread updated on my progress... and soon some photos

 

[made_in_the_alps_legacy]

My question is will this motor/battery be enought to propulse me? all togeter there will be like 105kg ... will i be able to climb hills? my goal is 40km/h on flat

- yes, it will propulse you.
- the original transmission ratio will probably need to be changed if you plan to climb hills
Side note :
- double check the voltage of your components (8s battery might be excessive for a 24V controller...)
- maybe look at my signature for a similar built