All: I put the below in the Battery Technology discussion but wanted to share it here as well:
.
.
.
First of all, great great forum. I have seen some excellent stuff here and have soaked up a tremendous amount of knowledge just from reading. After lurking E-S for a while, I've decided to register and post for the sole purpose of inviting you all to attend a webinar hosted by AllCell Technologies:
https://www3.gotomeeting.com/register/276675270
This will be a technical overview of how we use our patented Phase Change Material (PCM) technology to assemble complete lithium eBike battery packs.
What to expect:
We'll take 15-20 minutes to give an overview of our technology followed by plenty of time dedicated to an open question and answer session. We hope you can join us and I urge you to feel free to ask as many questions as you'd like on the 26th. The presentation will be given by an engineer who will (or should be :wink: ) able to answer all of them.
Please note, AllCell works with manufacturers, suppliers and distributors but not consumers. However, with the purpose of broadcasting the technical aspects of PCM and its role in thermal management of lithium batteries, this webinar is open to anybody interested in learning more.
I hope I'm posting this in the right place. If not, I apologize and would ask that someone graciously point me in the right direction. Thanks all, and hope to hear from you on the 26th.
.
.
.
First of all, great great forum. I have seen some excellent stuff here and have soaked up a tremendous amount of knowledge just from reading. After lurking E-S for a while, I've decided to register and post for the sole purpose of inviting you all to attend a webinar hosted by AllCell Technologies:
https://www3.gotomeeting.com/register/276675270
This will be a technical overview of how we use our patented Phase Change Material (PCM) technology to assemble complete lithium eBike battery packs.
What to expect:
We'll take 15-20 minutes to give an overview of our technology followed by plenty of time dedicated to an open question and answer session. We hope you can join us and I urge you to feel free to ask as many questions as you'd like on the 26th. The presentation will be given by an engineer who will (or should be :wink: ) able to answer all of them.
Please note, AllCell works with manufacturers, suppliers and distributors but not consumers. However, with the purpose of broadcasting the technical aspects of PCM and its role in thermal management of lithium batteries, this webinar is open to anybody interested in learning more.
I hope I'm posting this in the right place. If not, I apologize and would ask that someone graciously point me in the right direction. Thanks all, and hope to hear from you on the 26th.