SwampDonkey
100 W
- Joined
- Mar 27, 2018
- Messages
- 227
Hello, all!
Im trying to upgrade a friends bike over here. I picked up a "Hot Rod" 52V Sondors controller (KT36/48ZWSRD) from Luna since it had the same Higo plugs as his Eprodigy "Logan" bike. It has an LCD-3 display and an "Achiever" coaxial mid drive. Im running into more issues than I planned on. For one, I can get the controller to turn on in order to start deciphering the motor/ hall sensor wires. I found this pic in another forum, but it didnt work when I tried it. Any advice?
Im trying to upgrade a friends bike over here. I picked up a "Hot Rod" 52V Sondors controller (KT36/48ZWSRD) from Luna since it had the same Higo plugs as his Eprodigy "Logan" bike. It has an LCD-3 display and an "Achiever" coaxial mid drive. Im running into more issues than I planned on. For one, I can get the controller to turn on in order to start deciphering the motor/ hall sensor wires. I found this pic in another forum, but it didnt work when I tried it. Any advice?