"MP6" 1st Panurge's build ENDED

Hey Guys
Another serious climb.....as usual with a 10$ video device :)
This is a 500m long but really steep climb. Any of you that has been or will be in this beautiful town should walk from Ponte Vecchio to the belvedere fortress...you may feel the inclination looking at the house's thresholds. I had maybe 4 meters of flat start, and haven't used pedals...the 4t Astro geared for 50 Kph Rocks!!!

[youtube]_BHw703CSKc[/youtube]

That's a Gmap link so you can get google inclination, or have a virtual promenade, since it is the Center Town of an important City of Art, there are really high def virtual and real scenarios......enjoy.

https://www.google.it/maps/dir/43.766966,11.2540336/43.7626759,11.254845/@43.7669239,11.2545998,17z/data=!4m9!4m8!1m5!3m4!1m2!1d11.2543051!2d43.7665318!3s0x132a53ffbd6ce19f:0x67cf73e49a76c4a3!1m0!3e2
 
I'm testing and tuning the idle feature with the CA, leaving a little residual at 0 throttle. this makes the bike perfect avoiding the typical surges. I'll get much more confidence reapplying the throttle out of a corner, less drag while pedaling and a much more easy handling at slow speeds (wheelies and triks)
I'll post some vid of the idling status, values, and consumptions, when I get a final setup.
[youtube]wsx7ZDaV5s0[/youtube]
 
Just to show that the AMP mode via CA, with a little throttle residual, gives a good throttle response and control at the very slow RPMs, It's still not the best setup for trials, but more than enough for almost any technical track

It's just the few watts needed to idle the wheel at that speed.
I'm thinking about a switch for the CA at this point, to have presets for amps and speed but even for that residual (I.E. 0 pass thru, slower idle, faster idle)
[youtube]tadfSjb9GAI[/youtube]
 
I have the old offset adapter for 130 PCD chainrings, this allows only for very thin calipers (wheel side) mine are the old GustavM that are floating calipers with one side pistons only.
The new shaped adapters from Matt are good for a wider choice of brakes (18mm of space Vs 10-11mm).
There are many topics about the Left side drive + brake rotor.....here the new adapter with a Hope caliper from rodgah. http://endless-sphere.com/forums/viewtopic.php?f=28&t=25101&start=125#p777564
here the Old Adapter + Magura gustavM
file.php
on my bike
 
Back
Top