Need help identifying this hub motor connector

[Diva]

Hi all!

I would like to find out what brand/type of connector this is as there is no writing on it. From the outside, it looks like a Z910, almost same diameter. But the contacts are bigger, more like on a Z916, with an hexagon shape. The controller is a 36V 30A.


Thanks in advance for your help

 

[edben05]

Hi all!

I would like to find out what brand/type of connector this is as there is no writing on it. From the outside, it looks like a Z910, almost same diameter. But the contacts are bigger, more like on a Z916, with an hexagon shape. The controller is a 36V 30A.
View attachment 363184
View attachment 363185
Thanks in advance for your help

Im pretty sure its a Higo Z910, diff not a z916: View attachment 1734966480702.webp

 

[docw009]

Male plug with 9 pins and octagonal shape. Not in the Higo Catakog, Must be a competitor's product,

Are you looking for an extension cable? .

 

[Diva]

Male plug with 9 pins and octagonal shape. Not in the Higo Catakog, Must be a competitor's product,

Are you looking for an extension cable? .

Sorry, I'haven't been here for a while

Actually I was looking for whatever information about it. I had to change the motor of a small electric motorbike for a more torquey one, and this is the connector of the original motor/controller. I first didn't want to cut one of the 2 cables in order to be able to retrofit the original motor, but in the end swapped the controller connector for a Z916.