nutnspecial
10 MW
I am in the process of learning solidworks. Cool program that's much nicer than I remember A-cad being circa 1995.
Anyway, I'm going thru numerous very similar threads on solidworks/CAD, and wanted to request a 'cleanup' crew if that's appropriate.
Ideally I'm picturing fewer generic threads for info compaction/ ease of use. Then naturally other more specific topics could/would branch out;
That being said, please bump this one with the rest, or just remove it.
Otherwise I'll just continue to search/read and post on the subject, as normal. I was surprised there are something like a dozen small threads.
Thanks!
PS- I'm looking at the databases and toolbox, and am a little surprised to not find a drawing of the standard shimano 10t hub pawl for reference. It's fairly intricate to model, and I half expected someone would have already done it.
(it's the cog/pawl on a normal 135x10 bike up that accepts the freehub body with cassette.)
Anyway, I'm going thru numerous very similar threads on solidworks/CAD, and wanted to request a 'cleanup' crew if that's appropriate.
Ideally I'm picturing fewer generic threads for info compaction/ ease of use. Then naturally other more specific topics could/would branch out;
That being said, please bump this one with the rest, or just remove it.
Otherwise I'll just continue to search/read and post on the subject, as normal. I was surprised there are something like a dozen small threads.
Thanks!
PS- I'm looking at the databases and toolbox, and am a little surprised to not find a drawing of the standard shimano 10t hub pawl for reference. It's fairly intricate to model, and I half expected someone would have already done it.
(it's the cog/pawl on a normal 135x10 bike up that accepts the freehub body with cassette.)