recently my etwow scooter has been acting up. i've finally pin point it to a cable that has been cut due to stress.
all photos are here and you can see the cut wire
https://imgur.com/a/C2Giv
should i just solder the cut wire in yellow? would the solder be strong enough?
or should i just get the cable replacement from ebay? what is it called?
one end of the cable is female with 9 pin, but only 8 wire is actually used. the yellow, green, and blue are really thick. because the yellow is cut, the scooter can sometimes slow down or jerk around.
pls help, thanks!
all photos are here and you can see the cut wire
https://imgur.com/a/C2Giv
should i just solder the cut wire in yellow? would the solder be strong enough?
or should i just get the cable replacement from ebay? what is it called?
one end of the cable is female with 9 pin, but only 8 wire is actually used. the yellow, green, and blue are really thick. because the yellow is cut, the scooter can sometimes slow down or jerk around.
pls help, thanks!