http://scriptasylum.com/rc_speed/lipo.html
In this link, in prismatic connection. what is the bms requirement and charger requirement for 6s and 10 p cells?
guys,
I'm using 6s 18650 batteries containing a set of 10packs to get 36000mAh.
What should be the charger requirement for charging the above said battery pack.
I have ordered one for the same to test the sample. I saw it as the maximum possible. I have gone for 5800mAh since it might reduce the size of my power source. If it isnt possible then i should switch to 3600mah. SO it might take upto 6 cell in series and 20 sets of the same in parallel. Can u...
i'm going to use 18650 5800mAh batteries for drones. My requirement is 22 v for esc and 60 Ah for the motor. So, im going to connect 6 cells in series to get 22.2 volts and 10 sets of (6 series batteries ) to get the required amount. I require a bms for the same . Cost doesnt matter much . but...
guys i need to power an Esc which requires 55A and 22v. i'm using power source from 18650 batteries. I'm using 6 batteries in series + 10 sets of similar batteries to get
the required power ratings.
voltage:6*3.7=22.2v
current:5.8*10=58 a(10 sets of 6S)
how many slave boards do i require?
Guys i need to power an Esc which requires 55A and 22v. i'm using power source from 18650 batteries. I'm using 6 batteries in series + 10 sets of similar batteries to get
the required power ratings.
voltage:6*3.7=22.2v
current:5.8*10=58 a(10 sets of 6S)
What kind of BMS should I use? any...