Search results

Date Relevance Most replies

  1. S

    controller problem?

    Thanx for the quick reply! Is there a way to limit the controller? (Some kind of reversed shunt mod maybe) I've been running this dolphin pack without problems with a bbs02 750w so it should be able to take 25A right?
  2. S

    controller problem?

    Hey! I bought a s12s controller from bms battery. When I run it with no load everything is super smooth but when I ride it there's a problem. If I accelerate hard or try to go steep uphill it just cuts power. Almost as if the battery can't handle the amp-draw but when I restart everything is...
  3. S

    Problem mounting motor to dropouts

    Thanx guys for the replies! Motomech - do you have the full mail address to jack Xie?
  4. S

    Problem mounting motor to dropouts

    Got it from bms battery. I tried with 2 open spacers and the wire exiting on the inside of the dropout but then the wire gets damaged when the motor is spinning. The wire has to exit straight out, it cannot be bent even a bit since it will make contact with the inside of the spinning motor :(
  5. S

    Problem mounting motor to dropouts

    Am I stupid or did bmsb put the wire-exit at the wrong place on this motor? If I were to file the dropout I`m afraid the motor would sit very unstable in there. I don`t have the tools to make the hole in the bearing deeper, althogh I could try with a drill but I think it would be really messy...
  6. S

    GT E-drive from Russia

    Very impressive build! Subscribed...
  7. S

    Stealth Bomber goes Adaptto at 12kW

    Very nice build Allex! The adapto seems very impressive, the Russians know`s their stuff. It`s definitely something to concider for the next build. I just love the contrast you get with the Bomber in thesame picture as the two russian bikes :D
  8. S

    Ebikes.ca

    Awesome service! I would say eleven out of ten :D Order shipped out extremely fast. Even though I were a pain in the ass and added items literally 5 minutes before pickup, everything was handled perfectly by Justin. Email response has been really fast as well. If the products are even half as...
  9. S

    Ebikes.ca

    Thanx everyone! A bunch of nice small gadgets were added to the final order. The CS was a pilot item, I think one of the last ones. But you can probably email Justin and ask if there are any left. /T
  10. S

    Ebikes.ca

    Oh thanx Rodney64! I did`nt see your post at first. I`m not gonna do a lot of pedaling on the Big-Hub-build :wink: so a freewheel uppgrade is not necessary.
  11. S

    Ebikes.ca

    Thanx once again Dogman! Sold my car and going all-in on E-bikes now. Been commuting in heavy raingstorms a few times and passed the test, so full winter-commuting should be fine :D *1 BBS02 plug and play full kit allready ordered from bms. This is to safe up the commuting, since my Tonaro...
  12. S

    Ebikes.ca

    Hey all! I`ve been reading here for long enough, It`s finally time for action :D I`m placing an order from Ebikes.ca and I`m wondering if there is some gadgets in their store that I really shouldnt miss, now that Im shipping from them anyway? Shipping to Sweden is quite expensive so I want to...
  13. S

    New Bafang Crank-Drives

    Prefect mechanic-nails! :D
  14. S

    18650 battery Kit development and discussion[testing done]

    Very interesting thread agniusm! How far have you come in the development? What price range do you have in mind? I would probably buy a 14s 6p kit from you (or 7p works fine too).
  15. S

    New BMSBattery bottle style batteries

    Ypedal what can you say about the mount of this battery? Would it hold for offroad riding? If you mount it upside down under the downtube would it hold firm? Look forward to hear feedback since I`m concidering buing one along with a BBS02.
  16. S

    PANASONIC ebike battery change

    What is the Continuous Discharge Rate of the Panasonic cells?
  17. S

    New Bafang Crank-Drives

    BMSbattery are selling 2 different displays to this motor, C961 or C963 LCD display. I mailed them and asked more than a weak ago, but no answer. Anybody know what the differnece are between the two displays?
  18. S

    Super hiryuu - A BBS02 / Leafmotor / MXUS 3kW Dual sus. bike

    Interesting! Will follow this build for sure. Maby you should change the last centence in your signature during this bild :wink:
  19. S

    72V 1500w rear hub recommendations

    Thanx for the link. Nice review!
  20. S

    72v 50a sine wave controller

    Did you pull the trigger? :) Anything to say about the vendor?
  21. S

    72V 1500w rear hub recommendations

    Yep! Reality check - done. :) I know now that I widely overestimated 72V and it's going to take a big investment in battery to get to 65km/h. I'm settling for around 50 instead :( Are there other good options than 9c and crystalyte?
  22. S

    9c clone motor

    The good news is that the back of my mind were totally wrong :) It's 6 bolts. And the distance to the disc is all clear. The bad news is the calliper goes in 20mm from the disc, this is at a distance of 75mm from the center of the wheel. Unfortunately can't move it outwards since I got about...
  23. S

    9c clone motor

    Thanx bigtime for such a quick and accurate reply!! Can`t wait to get home and check it! Something in the back of my mind is telling me it`s 5 bolts, but I hope I`m wrong :)
  24. S

    9c clone motor

    Nice review Tench! Do you think it would be compatible with this disc brake and calliper? Dropout distance 135mm.
  25. S

    72V 1500w rear hub recommendations

    Nice simulator, Thanx! According to that, it seems like there is a limit somewhere around 50km/h for any 72V battery. Ill probably have to settle for 50 :( It's also very clear that, when it comes to both speed and torque, the 9c is just about as good as any crystalyte running at 72V 20A. How...
Back
Top