ASI BAC compatible dashboard (LCD)

[vitalik.t]

Except "Eggrider V2", are there any UART/CAN BUS/LIN BUS dashboards that are compatible with ASI BAC controllers?
Or at least where I can find spec/datasheet/API for creating a custom communication core?

 

[amberwolf]

AFAIK, any development info would need to come from ASI. They have dev kits / etc.

I don't know of any displays that work with them other than the ones they specify / sell, but there might be info in one of these threads (just searched, haven't read):

https://endless-sphere.com/forums/search.php?keywords=asi+lcd&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search

https://endless-sphere.com/forums/search.php?keywords=bac+lcd&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search

 

[vitalik.t]

Electricrt are selling ASI BAC 800 based Bafang systems, and that written in a product page:
"Supported displays are TFT 72V 750C (has a custom firmware that allows full compatibility with the BAC800 including assist modes, PAS, light, etc) and the Eggrider Display"
May I get that custom firmware?

 

[amberwolf]

Electricrt are selling ASI BAC 800 based Bafang systems, and that written in a product page:
"Supported displays are TFT 72V 750C (has a custom firmware that allows full compatibility with the BAC800 including assist modes, PAS, light, etc) and the Eggrider Display"
May I get that custom firmware?

Only people that can tell you that is the people with the custom firmware. Presumably that's the place that's selling them, so you have to ask there.

Since its' something they're selling, I can't imagine they would give you the firmware, because then it could be distributed and nobody would have to buy from them anymore.

 

[Grizzl-E]

ASI charges a fair bit for the software needed to create custom interfaces. I doubt you will get one for free, if you do, please share it if possible.