Hi, my name is Martin and I'm working on a home grown electric bike for several years now. I'm using my own designed ac induction motor with a Curtis 1236 controller. Battery is 24s18p Samsung 30q. BMS with current sensor. Bike is working, but I got the feeling it is lacking some power. Based on my calc I should reach 21.5kw with 300a phase current. This will result in about 240A battery current. As the current sensor of the BMS is not accurate i installed a cycle analyst. At the cycle analyst I see 140A maximum. This would explain the lack of power, but I don't know why the power is limited. I checked all settings several times, did Auto characterization several times, but no success. Any idea about the reason would be helpful. Thanks