GCinDC
100 MW
FYI
Hi GC,
The 5-speed 14-28t freewheel is 31mm in overall width/thickness, from the back of the threaded freehub to the outside of the lockring. The thickness of the cog stack only (from the back of the largest cog to the front of the smallest cog) is 26mm. The 7-speed 11-32t freewheel is 38mm in overall width, or 32mm if you're measuring just the cogs.
These measurements might be a few tenths of a millimeter off, since my calipers weren't long enough to reach over the large cog. But yes, the 7-speed freewheel is wider. Let me know if you have any other questions,
- Cycle 9