sparkyuiop
10 µW
Hello all.
I have been reading this forum with interest but I am not able to find anything more specific on the Bosch error code 550.
I have the Bosch Active Line Plus motor on the Purion system.
My bike has factory fitted lights that turn on with a press of the '+' button. Recently my front light stopped working and was only showing about 1.5v at the socket where it connects, on the side of the motor.
I could only remedy the situation by disconnecting the back light from it's socket and use it instead to power the front one. I had to also change the plug (observing polarity) as the front and back lights have different fittings.
All was working fine today for about 30 mins until I stopped at Tesco and found the bike would not turn on again when I came out. The motor does click when turned on but nothing on the display comes up.
If I connect the charger to the bike the charging display shows it charging correctly. Then if I remove the charging plug the bike powers on and works fine but shows error code '550'. After I turn it off I need to connect the charger again to turn it on.
Anyone got any ideas on this I would very much like to hear them as I am am amatuer at this but have some electronics experience.
I have been reading this forum with interest but I am not able to find anything more specific on the Bosch error code 550.
I have the Bosch Active Line Plus motor on the Purion system.
My bike has factory fitted lights that turn on with a press of the '+' button. Recently my front light stopped working and was only showing about 1.5v at the socket where it connects, on the side of the motor.
I could only remedy the situation by disconnecting the back light from it's socket and use it instead to power the front one. I had to also change the plug (observing polarity) as the front and back lights have different fittings.
All was working fine today for about 30 mins until I stopped at Tesco and found the bike would not turn on again when I came out. The motor does click when turned on but nothing on the display comes up.
If I connect the charger to the bike the charging display shows it charging correctly. Then if I remove the charging plug the bike powers on and works fine but shows error code '550'. After I turn it off I need to connect the charger again to turn it on.
Anyone got any ideas on this I would very much like to hear them as I am am amatuer at this but have some electronics experience.