dual esc?

[ev_nred]

is it possible to run 22.2v 2 to run a motor at 44.4v? thx u in advance

edit: my bad, what I ment was can I run 2 esc (22.v) to run one motor at 44v

 

[recumpence]

Yup, assuming your controller is good for that voltage, just run the packs in series and you are good.

Matt

 

[ev_nred]

sorry matt, what I ment was can 2 22.2v esc to run a motor at 44.4v?

 

[recumpence]

Nope.

Matt

 

[ev_nred]

oh well, thanks anyways!

 

[Hillhater]

Why not just get one 50v ESC fron the HV Castle range ?

 

[ev_nred]

those 50v esc are epic but not all of us are made out of cash u know :wink:

 

[Hillhater]

how much amps do you need ?
some guys swear that the $20, 6FET "Mini Monster" controller will handle 40A, or more if "modded"

 

[gwhy!]

how much amps do you need ?
some guys swear that the $20, 6FET "Mini Monster" controller will handle 40A, or more if "modded"

The Lyen Mini monster is already modded ( well I hope it is for $68 (may not be the exact price ) the $20 6fet will need to be modded . I push 70-80A through my modded 6fet controller @44.4v ..

 

[ev_nred]

minin monster? is thier a link to info about that esc and where to get it? is that how many amps it can handel with out a larger fan/heatsink? thanks

 

[gwhy!]

minin monster? is thier a link to info about that esc and where to get it? is that how many amps it can handel with out a larger fan/heatsink? thanks

You would have to PM Lyen ( a forum member on here ) for more info on the mini monster. My 6 fet controller is one I have modded myself and mine will run up to those amps and stays very cool without a fan but I have added a additional heatsink ( but not totally sure if it really needed ).

 

[ev_nred]

thanks ill pm him!