Fechter's Throttle Interface for RC controllers

Hello

I enhanced the schematic of fechters throttle interface to be able to measure 3 temperatures (Motor, ECS, Battery) with adjustable limits. If thresholds are overpassed it can be shown via seperated LEDs. Maybe some of you can make use of it. I did not test it yet but i will as soon as i get my interface...

Best regards Peter
 

Attachments

  • modification.pdf
    298.9 KB · Views: 202
If you don't need individual LED indicators, I think you could use any number of temperature sensors by using the arrangement below. The upper divider resistor on each thermistor (shown as 10k) could be tweaked for individual temperature set points. Whichever one gets overtemp first will pull down through the diodes and trigger the current reduction. Less parts this way.
 
Hey Fetcher,

Any chance of getting one of these off of you still please? I'm a newbie wanting to run an astro 3210 with Matts signle stage reduction drive and a castle controller. Thank you! Rana
 
The topic listed no longer exists:
http://www.endless-sphere.com/forums/viewtopic.php?f=9&t=11877&p=180070#p180070

Is there another place to go for these? I'm really hoping to not have to make my own. Thanks!

Mike
 
mikegrundvig said:
The topic listed no longer exists:
http://www.endless-sphere.com/forums/viewtopic.php?f=9&t=11877&p=180070#p180070

Is there another place to go for these? I'm really hoping to not have to make my own. Thanks!

Mike

There is (not sure Mr Fecther has any of these left) if not there is a digital pc programmable unit available forum member evlogic ? i think it is sell them for ~$US100 bucks IIRC? I have one of Fecthers needed a lil tweaking (thanks again Mr Fecther) and now it works BRILLIANTLY...I have heard the digital version is also very good too.

KiM
 
http://www.endless-sphere.com/forums/viewtopic.php?f=28&t=11682
http://www.evlogix.com/content.php?link=Rcthrottle

Not sure what happened to his For Sale thread.......
 
Back
Top