Help Sabvoton and QS-205

[e98ss]

I'm trying setup my QS-205 with the Sabvoton controller. But for some reason it doesn't power on even though the TFT powers up and shows the battery volatage. It also displays "Error 30H" and no leds on the controller are flashing. Does anyone know how to wire it so it works ?View attachment 1 I contacted the seller and he gave me a wiring diagram but i already had it wired correctly.

 

[tahitiboob]

have you wire the orange wire to the battery power.
is not your voltage low to turn on the controller?

 

[e98ss]

There isn't an orange wire and im not sure which wire is ignition.

 

[shortcircuit911]

Make sure the 3 wire connector is connected. It is probably saying 30h because that connector is disconnected. You need to disconnect that connector when changing the the parameters in the app (MQCON). Hope that helps.

 

[e98ss]

The 3 wire connector is connected, and it still keeps giving the error 30h.

 

[MinoRoad]

you have to do it sabvoton hall angle test.

https://www.youtube.com/watch?v=nsnkojI1ghE