markw
10 W
Hi guys,
Not sure what's going on but when connecting my battery pack throttle leds light up but won't give me any power to the motor.
Variables that could be the problem:
Cells in LiPo got a slightly heavier voltage charge (all balance) last night. All cells in my 3s2p 5s turnigy got charged 4.14 (highest cells are cell 1 at 4.15v) ... shouldnt be a problem because the controller has 63v caps...
Bike was transported to another location (but not leaning on the side that the motor connectors exit
When pack was plugged to bike today 2p was missing. Harness has connectors for 1p and 2p as connectors, 2nd connectors disconnected in transport. Woops. Still lit up the bike leds... but 5Ah of the 10Ah pack was missing.
All connections are set
Not sure where to go from here. Any help would be awesome. More details on my setup are in the thread in my sig.
Thanks in advance for any help!
Not sure what's going on but when connecting my battery pack throttle leds light up but won't give me any power to the motor.
Variables that could be the problem:
Cells in LiPo got a slightly heavier voltage charge (all balance) last night. All cells in my 3s2p 5s turnigy got charged 4.14 (highest cells are cell 1 at 4.15v) ... shouldnt be a problem because the controller has 63v caps...
Bike was transported to another location (but not leaning on the side that the motor connectors exit
When pack was plugged to bike today 2p was missing. Harness has connectors for 1p and 2p as connectors, 2nd connectors disconnected in transport. Woops. Still lit up the bike leds... but 5Ah of the 10Ah pack was missing.
All connections are set
Not sure where to go from here. Any help would be awesome. More details on my setup are in the thread in my sig.
Thanks in advance for any help!