Inwo
10 kW
I have DLD and DCF from a Polaris Ranger to share if someone can help me get reverse to work. My Sevcon tech struck out last night.
It should have been plug and play, transplanting the oem controller to a R&T 4wd vehicle, but it won't run in reverse.
S6 48v Gen4 Sevcon controller running an 8kw induction motor.
Driver pipeline shows everything is fine. Switches to drive with fs1. Throttle voltage climbs with pedal.
Throttle "value" remains unchanged at "0", when in reverse.
Value swings from 0 to 1 with pedal, and wheels turn in forward.
No errors. It seems that it is waiting for some condition to be met before allowing reverse. No idea what that might be. Reverse beeper?
All mapped io is accounted for.
Any ideas?
It should have been plug and play, transplanting the oem controller to a R&T 4wd vehicle, but it won't run in reverse.
S6 48v Gen4 Sevcon controller running an 8kw induction motor.
Driver pipeline shows everything is fine. Switches to drive with fs1. Throttle voltage climbs with pedal.
Throttle "value" remains unchanged at "0", when in reverse.
Value swings from 0 to 1 with pedal, and wheels turn in forward.
No errors. It seems that it is waiting for some condition to be met before allowing reverse. No idea what that might be. Reverse beeper?
All mapped io is accounted for.
Any ideas?