Denisesewa
100 W
I purchased a Hyperion 1420i net3 to charge my 14s 2p 5000mah turnigy pack without doing enough research , my power supply is 12v 9amp continuouse so when I tried to charge the pack as a unit the charger says low input voltage at 12.3 volts unless I turn the charge current down to less than 1.5 amp, the recomended input for the hyperion is 24v+ -750W+ even though it says the voltage can be from 10.5 to 29 V.
Since cash is a bit tight and I really only need to charge at 1C can I get away with something like this? >> http://www.ebay.com/itm/270785432198?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Any other recommendations?
Sorry if this a redundant question, I did search but found nothing useful for an electronics dummy.
Since cash is a bit tight and I really only need to charge at 1C can I get away with something like this? >> http://www.ebay.com/itm/270785432198?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Any other recommendations?
Sorry if this a redundant question, I did search but found nothing useful for an electronics dummy.