nvreeland
1 µW
- Joined
- Feb 15, 2022
- Messages
- 2
I have a pedego ford super cruiser. It's been a great bike, but the throttle crapped out on me. I opened it up and did a pin out. Blue and yellow wires go to the power switch, White is +5v to throttle, Black is negative on both the battery charge LEDs and the throttle, green is signal from throttle, and red is positive to battery LEDs. I was wanting to get a throttle with a key like https://www.amazon.com/YWNYT-Thrott...fix=6+wire+ebike+throttle+48v+,aps,156&sr=8-6 but it only has 5 wires and I'm not sure how i would wire it. I have been having trouble finding a throttle with a key that is 6 wires. any input on how to wire a 5 wire throttle with 6 wires coming from the controller would be great. I don't want to buy something that won't work right. I have found 6 wire throttles that i know would work, but they are push button and not keyed. https://www.amazon.com/Throttle-Lev...fix=6+wire+ebike+throttle+48v+,aps,156&sr=8-2 Any insight would be appreciated. Attached is a picture of the original throttle taken apart. Sorry for blurry photo.