We have two tricycles which are fitted with Bafang front wheel hub motors and Lishui controllers with Bafang C961 displays.
These displays only allow for very a limited number of user adjustable setting.
On our trikes several of these setting are also not adjustable ie. The road speed,and the wheel size. There are no other options apart the number of PAS levels , the time and backlight than can be user changed.
As a result I would like to change the controllers and displays in order to be able change the max amps , and to alter the power levels on different PAs settings, also I would like to be able adjust the speed that the PAs levels start up and the amount of power at start up.
the Motors are Bafang FM G060.250 D. BLDC 48volt 20” A5 9 pin connecto.
the controllers are Lishui LSW1569-13-4M 48volt max 18amp rated 9 amp Low volt 40v
batteries are 48 volt 15ah 750Wh
displays bafang C961
idealy I would have the same Juliet connectors as currently fitted,
I have contacted Lishui who offer no help on programming their controller. Any advice on sourcing replacement controllers and displays or how to get access to program the existing controllers would be gratefully received.
I can supply images if required of the components .
These displays only allow for very a limited number of user adjustable setting.
On our trikes several of these setting are also not adjustable ie. The road speed,and the wheel size. There are no other options apart the number of PAS levels , the time and backlight than can be user changed.
As a result I would like to change the controllers and displays in order to be able change the max amps , and to alter the power levels on different PAs settings, also I would like to be able adjust the speed that the PAs levels start up and the amount of power at start up.
the Motors are Bafang FM G060.250 D. BLDC 48volt 20” A5 9 pin connecto.
the controllers are Lishui LSW1569-13-4M 48volt max 18amp rated 9 amp Low volt 40v
batteries are 48 volt 15ah 750Wh
displays bafang C961
idealy I would have the same Juliet connectors as currently fitted,
I have contacted Lishui who offer no help on programming their controller. Any advice on sourcing replacement controllers and displays or how to get access to program the existing controllers would be gratefully received.
I can supply images if required of the components .