I sit and wonder something.
I see that in 3 gear the value is 99% of the speed.
When I bought the bike from the sellers, I received instructions on how to shift 1-2-3 gears. After turning on 3 gears, the speed of the scooter does not exceed 45 km.
I see now the controller is already set to a value of 3 gears of 99% (2 in the photo)
My question is: what will I change?
The picture shows a set speed limit of 78% (1 in the photo). The value of 3 gears is set to 99% (2 in the photo), but what I found and tested right now is the speed before programming.
1 gear about 19km
2 gear about 35km
3 gear about 45km.
If 78% (1 in the photo) = 45km, it follows that:
2 gear: 45km - 78% (2 in the photo) = 35km fits exactly
1 gear: 45km - 43% (2 in the photo) = 19km also fits.
What I think is to change only the overall speed limit, namely 78% (1 in the photo) but do it at 99% and then I believe the speed will go up to 60km at all 99%, theoretically.
If I'm wrong please correct me.