First off I am very new to all this.
I have the opportunity to buy two of these https://www.dicksmith.com.au/da/buy...Edz4OOkvozeqxFJVGz3RvwSSD8qd__DcaApMWEALw_wcB 36v 10Ah batteries for around half price each and I'm wondering what motors I could run off them.
I can't find much information about these online but I'm assuming they can supply a continuous 15A (idrk if thats a reasonable guess or not)
So, I'm thinking if I ran them in series I could power a 1000w motor, the only problem is all the 1000w motors I can find are all 48v, would it be fine to just use one of these or would that kill the motor/controller.
I also looked for some 72v motors but they are all around the 3000w range which would require a current draw of around 42A which I think will probably destroy my batteries.
I guess what I'm asking is what would be my ideal, cheap but also kind of powerfull set-up??
Also sorry if this is not the right place to ask this question, while I was doing some looking online I came across this board alot so I thought why not give it a stab.
I have the opportunity to buy two of these https://www.dicksmith.com.au/da/buy...Edz4OOkvozeqxFJVGz3RvwSSD8qd__DcaApMWEALw_wcB 36v 10Ah batteries for around half price each and I'm wondering what motors I could run off them.
I can't find much information about these online but I'm assuming they can supply a continuous 15A (idrk if thats a reasonable guess or not)
So, I'm thinking if I ran them in series I could power a 1000w motor, the only problem is all the 1000w motors I can find are all 48v, would it be fine to just use one of these or would that kill the motor/controller.
I also looked for some 72v motors but they are all around the 3000w range which would require a current draw of around 42A which I think will probably destroy my batteries.
I guess what I'm asking is what would be my ideal, cheap but also kind of powerfull set-up??
Also sorry if this is not the right place to ask this question, while I was doing some looking online I came across this board alot so I thought why not give it a stab.