peterperkins
100 W
- Joined
- Jun 6, 2008
- Messages
- 196
I'm interested in BMS options for a 50S Lifepo4 pack. Nominal 3.3V per cell.
Now I must make it clear.
I am not interested in any BMS with a bunch of large mosfets on the board, as I do not want the BMS directly controlling the load/charge current.
I want simple signal/logic high low outputs/or serial cell data for instance, to tell me about high or low cell V and some on board balancing say < 500ma.
What are your thoughts and recommendations?
I have built my own before but am interested in something commercially available and a lot smaller than my prev efforts.
Now I must make it clear.
I am not interested in any BMS with a bunch of large mosfets on the board, as I do not want the BMS directly controlling the load/charge current.
I want simple signal/logic high low outputs/or serial cell data for instance, to tell me about high or low cell V and some on board balancing say < 500ma.
What are your thoughts and recommendations?
I have built my own before but am interested in something commercially available and a lot smaller than my prev efforts.