neptronix

If you want the features, that are offered. I want none of them. I want a cheap Chinese display as a Speedo and to set the assist level...

VESC is a very good controller (if it's a motor, vesc can move it, basically), and goes very deep into making motors work, but once you...

Avoid flipsky at all costs. Really bad build quality. I bought one of these units and it will nor program. See my experience on the...

One Test is worth 1,000 Opinions - author unknown (except on ES)

money, style?

Here's another thought. The more i raise the front, the more confident the bike feels at high speed due to the slacker fork angle and...

^-- i love those, i've been experimenting with mid drives and all sorts of different ratios and chain length, i have some of these that...

Did the pedal hack to get the cranks forward and upwards using a ghost ring. At half compression, and a very sharp turn angle, i...

Quick recap: - I have been lubricant ignorant and just used below average stuff until today. - I am using the wrong lubricant for my dry...

I'm honestly surprised at how close my climbing speeds are to my upright bike thanks to the BMX racing tire in the rear + high PSI. I...

I missed the part about a 9 speed chain. Why the hell would you do that.. ..now i know why i'm the first person to post about this on ES.. 😔

Well they're using a 9 speed chain, so they left all the durability on the table. And they're using, from the look of it, an 8-9-10...

If you are patient and careful, you may be able to count the poles by manually rotating the wheel backwards very slowly, feeling for...

In this situation, first I start with a rough guess at poles per revolution, like 100 for a geared hub motor. I run the thing wide open...