e-beach

So what kind of charger did they send you in the first place?

At 15v it would seem to me that more then one of the 10 groups is under 3v. The only way to know is for the OP to cut it open to access...

Please let me know if I have this wrong, but your Low Voltage Cutoff function is not allowing you to get a proper voltage reading on...

I really don't understand what you are saying here. A: Why would the BMS "lock" the battery down? B: What switch are you referring to...

There is something else I am not understanding. Is your charging wires looping to the main battery while you have a second battery...

Can you access your BMS wiring so you can test each cell group?

I am seeing a board for a diode but I am not seeing a diode on the board. That is confusing me.

May 13 (UPI) -- A California man ordered by his city to conceal the boat parked in his driveway with a fence hired his artist neighbor...

The first movie I worked on was a Roger Corman movie. It was titled "Wizards of the Lost Kingdom 2." It didn't matter that nobody on the...

Felt it here. It kinda started to rumble like it wanted to get bigger but then dissipated. Like thunder in the distance but with the...

OK time for some serious diagnosis. Go here and: Troubleshooting - Learn Test for Blown Mosfets Test for a Defective Hall Sensor

Sounds like somehow you got your phase wires out of order. Go back and double check that your phase wires are connected properly.

We just had a morning quickie......And what would you guess is just a mile or so west of Windsor Hills? Why that would be the Inglewood...

Several layers of shrink tubing from the connector to an inch or so beyond the spot where the solder wicked into strands will suppress...