Recent content by advancedo

I can't test any of your suggestions because i have cutted red and blue throttle cables to use the connectors for my DIY-Controller. I wish you success with your company. There are many people which can't programm a mikrocontroller or they are to lazy to do this or learning to do this. Those...

Hello to all, don't waste your time with speedict. There are many unsolved problems and missing features which we never get. Here in my native country there is a open-source-solution based on arduino-hardware in a german forum. With this Hard- and Software you can do things that speedict...

Here is it: First you can see PAS shows Cadence=23,8 and Throttle-Out is going to maximum (Throttle-Grip is in Off-Position). Next you can see Throttle-Out reaches maximum (without pedalling, PAS=0 and speed is over 6 km/h) when Throttle-In is 211 and not near the maximum at 447...

Hi, after 3 testdrives over several hours with speedict-ebike and testing various software-settings it seems not possible to get a functional setting as I would expect. I want to use Road Legal 2 Mode. I have connected speed-sensor to port 1 (works correct), blue throttle-in-cable to port 2...

Hi Danny, here i give you feedback to your new website: 1. It looks fine. 2. I can use your new website with Konqueror Version 4.4.4 (KDE 4.4.4) "release 2" but not with Firefox Version 3.6.6 (Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.6) Gecko/20100626 SUSE/3.6.6-1.2 Firefox/3.6.6). With...

Hi Danny, is it possible (in the future) to use the usb-port or bluetooth (or if the microcontroller have an i2c-interface to use free io-ports) to connect to an (USB-/bluetooth)LCD? I ask this because android-smartphones are smart, but in the bright sunlight is every modern smartphone...

Yes, I agree a solution in software would be smarter. A similar problem you could get with digital mikrocontroller circuit, because the slowest cadence may 30 rpm >> frequency of torque sensor output is 1 Hz. The mikrocontroller doesn't know for one second if there come another high torque...

Simply put a capacitor between throttle out signal (or torque sensor output) and GND. The capacitor will smooth the rhytmic dc. See here in german language: http://www.elektronik-kompendium.de/sites/slt/0210251.htm In english see here: http://en.wikipedia.org/wiki/Ripple_%28electrical%29 With...

Hi Danny, Android-client-2.4.3: When I select PAS-Mode with 5 magnets, Port Status says: PAS In 50 (real Cadence is 60, measured with timer). When I change to 4 magnets (PAS-Sensor has still 5 magnets), Port-Status now show the right value: PAS In 60.

Thank you!

Hello Danny, eBike, firmware 2.4: Export to csv with PC-Suite-1.0.6: column-separator is comma, decimal-point is point. >>> OK. Export to csv with android-client-2.4.2: column-separator is comma, decimal-point is comma >>> not usable in Excel, because column-separator must be different from...

Hi fizzit, Make it simply like here: http://www.avdweb.nl/Article_files/Solarbike/Motor-controller/Input-capacitor-pre-charge-cable.jpg from http://www.avdweb.nl/solar-bike/electronics/motor-controller.html

Hi Danny, 1. Can you explain the differences in hardware between ebike, venus, mars and mercury. 2. What hardware get I, when I order from speedict.com? 3. The blue and red throttle input/output cables are only needed for "old" ebike hardware, when I want to use Throttle or Road Legal Modes? 4...