Recent content by Anakin

  1. A

    Hi output brake wire

    Hi can nebody tel me or point me in da right direction on how to add a hi output brake wire to a controller my controller does have a low outputs brake wire. Also I noticed hi. Brake output wire is a single wire not the usual two how is it then connected? Any info wld be gr8. Thx in Advanced
  2. A

    1500w bldc

    Hi if somebody could help recommend exactly what I need to setup a 48v 1500w bldc mid drive motor (rpm 5600 Current output=31.5. as a noob I'd appreciate any explanation on the type of controller and battery i require to meet my goal of 50-70km
  3. A

    Lithiums or Bms drive me crazy learnt a lot but not enuf

    I know women that are less maintenance then the lithium packs I had my night mares begin under load first I exp voltage sag when it seems dat I have overcome this. Is its seems to be over current whatever's coz as soon as I touch throttle it cuts off I ended putting my SLA 48v12Ah and its smooth...
  4. A

    Phase and hall connection with throttle problem

    I had no idea that I had to sit in the parameters to p1 nor do I know how to do it. I will try to do research now on how to but if anyone knows how to I be very grateful
  5. A

    Phase and hall connection with throttle problem

    It's also compatible at 48v according to advertise. I do have lcd. I did test with a different motor same specs when phase wires connected with diff combo it worked but seem to be slow. Given all phase wires are correctly hooked up both motors shld produce same results right? So how does 1...
  6. A

    Phase and hall connection with throttle problem

    48v 20ah lifepo4. Bms 15amp max current is 30
  7. A

    Phase and hall connection with throttle problem

    I'm measuring amps as I accelerate it doesn't seem to matter the current drawn whether it's 3 amps or at 10amps it's cuts of at bout 4-5secs
  8. A

    Phase and hall connection with throttle problem

    http://www.aliexpress.com/item/Black-36V-1200W-Brushless-DC-Sine-Wave-Controller-48V-1500W-ebike-controller-Regenerative-Function/32333156665.html?tracelog=ae-app-ios-sharefor-shkmail This is happening under no load at all motor is hooked up to controller only
  9. A

    Phase and hall connection with throttle problem

    When connecting my ku36 sine wave motor to my 1500w Bldc boma. My throttle cuts out but works when I twist throttle again but cuts out again this will repeat as much as I twist throttle any insight n help is appreciated
  10. A

    PAnasonic 18650 3400mah

    How do I avoid fakes is der anything to look out for. I know der a lot of fakes but in particular being very new has der been cases of lg mj1 3500 being fakes. One vendor offered a guarantee of authentic batteries or refund of ten times will be compensated. I replied I feel of more confident to...
  11. A

    PAnasonic 18650 3400mah

    I have 1500w Bldc mid drive bins motor with either Lyen 12 controller or the ku36 17amp max 35amp sine wave range is important but I want to be able to reach the max top speed so far it's 52km/h. Decided the lg mj1 3500 10amp discharge rate. My best quote is $3.65usd for 200cell. With DhL...
  12. A

    PAnasonic 18650 3400mah

    I appreciate the link u sent me but do uno ne other suppliers that u Cld recommend are there be vendors from alibaba that are reliable. Best quote for shipping so far is $310. Hard to justify that amount
  13. A

    PAnasonic 18650 3400mah

    Why is a high discharge battery important when selecting cell to build for ebike
  14. A

    PAnasonic 18650 3400mah

    How bout LG E1 3250mah a supplier recommended
  15. A

    PAnasonic 18650 3400mah

    Thx heaps found a source selling it for $1183 for 200 units. Here's link. http://www.aliexpress.com/item/200pcs-lot-free-shipping-NCR18650B-3400mah-for-18650-panasonic-battery/2009099270.html Will check out batteries u suggested thx
See more
Back
Top