Bush mechanic

Leaking tanks, lower than advertised power output, excessive audible noise, and ineffective heating seem to be the most common...

Not really sure where to post this, hopefully this will do. I need something with a minimum 5L capacity for tools, toys, PCB's etc. Has...

Not an engineer and never had a system exceeding 2000w, but I've done this for years without issues with much lower power packs (14s...

Unashamedly biased, but 10 years riding a heavy long tail yuba with various rear hub motor configs (26"), I would put a good rear hub...

The main contenders I have in mind are 30T, 40T, and P42a cells. To clarify, continual discharge around 10-15A, but it's going to need...

Thanks guys, as you've all mentioned it, yes I have to agree entirely, it is going to be a rough and probably shortened life, and have...

Lads, I'm hoping to gear up and start my first DIY battery build in the not too distant future. I do still need to collect the equipment...

Thanks for putting it into perspective, maybe not as unreasonable as I'd thought. Yes the 26x3.0 sounds good, I wish there was a high...

I know it's been discussed in many places on the internet, from 96er' to 69er's and the rest, but I'm wondering if anyone here has tried...

Good point, not much open length, but should be OK in a 26 inch wheel. Thanks once again. Will see if I can pick one up at a good price.

Has indeed been my method once or twice, stuck many k's from home!! Out of interest what are your thoughts on the Park TM1 spoke...

I can't speak from experience, but they are rated pretty highly from what I have read in the past, apparently have supplied NASA...

https://ntrs.nasa.gov/citations/19880001642

Nice, thank you! The image on Grin;s website looks like it has eyelets, but it will be a stock photo, regardless if they are running...

https://electrified.com.au/products/molicel-p42a-ebike-battery This caught my eye, custom batteries assembled locally using Molicel P42A's