Recent content by buzztiaan

I'm mostly concerned about the 'windings' and 'turns' , some pages even speak about 'poles' , zjeez Can that aliexpress motor work as a drop-in replacement on my ESC? :D

Ok this maybe looks good ; http://www.aliexpress.com/item/free-shipping-5065-50-65-270KV-Heavy-duty-brushless-Sensored-motor-2-6KG-3-8S-for/32678505359.html Anyone have a clue if this will work with the (discontinued) HK150 ESC?

Thanks, mirrored here for posterity; Enertion's R-Spec II 6355 190kv Enertion's R-Spec II 6372 190kv DIY's 6355 230kv DIY's 5065 170kv DIY's 6374 230kv Psycotiller's 5065 270kv sensored Turnigy Aerodrive SK3 6364 213kv (and all 260kv or less) Turnigy G160 (limited to 10s - optional choice...

Heya, ( my beatup SK3 5055 280kv ) My current SK3 is getting pretty beatup, so I went over to order a new one, only to find their stock practically dried up :( Whats this year's go-to motor with low kv for a 6S setup? What kind of motors are you guys running?

I wrote my own arduino-nrf24 code , without a display. I'm not so happy with it and need to clean it up some, but will share. Also need to look at your code, maybe it can run on my hardware. Mostly looking for insight in making the throttle behave non-linear and maybe have some fake...

right, now to find the rest of my parts ;)

and BOOM , ~3 hours of messing with a pillar drill, a reamer and a rotary table, and it fits! w00t pics on link; http://imgur.com/a/uvauU

Guess just an FYI , -do not- order the UniverSal Truck Mount from Bruno now, as it does not work as-is

Alright, bruno mailed me back. He says the CNC-ing has a mistake, the truck clamp is 28mm on one side and 30mm on the other. Which won't fit. New parts will have to be made, 3 weeks delay on taking my board out ;( Asking permission to mod what i have now ..

Heya, I just received Bruno's production of the ADS UST motormount, but i'm having a hard time figuring out how its supposed to fit .. bigger version on http://i.imgur.com/Llx7YEb.jpg as you can see, the curve of the left part (half of the truck clamp) doesn't fit the curve of the clamp...

Could an admin move the non-arduino posts to a seperate thread? :D

You could identify the proper pins to solder to with a Ohmmeter

Oh yeah, that is a lot more than expected! I wasn't so lucky with trying out SLA's..

FYI on SLA , you get less than original capacity if you discharge above ~0.1C, which i guess you are doing?

Also, here is my entry for most-shitty-controller ; http://imgur.com/a/TCktG * zarya's 'nrfsensornode v1' board ( https://nurdspace.nl/NrfSensorNode ), which has; ** ams1117 regulator ** arduino pro mini ** nrf24l01 also; * adafruit powerboost 500 * 500mah lipo (also from adafruit)...