ccihon

You mentioned you have Bafang motor. Both of these brakes will need the connectors and pinouts changed to work with these, or adapters...

I agree pedaling and braking don't normally happen together. Every commercial ebike I have seen includes this system, so I assume must...

Regen would likely only help a bit. You can mount bigger or multiple batteries, of course, but the bike gets heavier. Battery range is...

Ready to roll ebikes won't likely be 1000W or 20ah - so a conversion could get you there likely for cheaper. That Schwinn mtb looks "OK"...

I am tempted to add hydraulics to my bbshd-powered trike - but same issues - I currently have big rotors and TRP Spyre mechanicals. They...

I have a similar trike, also built by Performer. It is rigid frame, direct steer. I have fitted a motorcycle steering damper, mainly...

I'm guessing "smooth tread" was autocorrected to "treadmill"

The solutions you are looking at, including trailers etc, are certainly designed to make install easier - combining the battery...

Aside from the drawback of tire friction drive, I think mounting any one of these three options to a tadpole frame design will be a...

That Magnum can fold for transport I think? Do the modifications prevent that? I wonder if anyone has done something like this arrange...

Very interesting setup - I think the motor arrangement is nearly the "ultimate" trike solution, as it allows retention of gears etc, and...

Sounds good. I recall I used some longer bolts than provided by Bafang for passing through the thicker bracket material and leaving...

I think the ones made of thinner material are around US $20, thicker maybe $25? It is a lot for what I think is not a very elegant...

I have heard many folks choosing to do away with brake cutoff circuits, both for hub and mid-drive setups. I do think in normal use...

I bought my bbshd kit from Luna, along with their offset 48-tooth ring, which like the lekkie moves the chain line in significantly...