Recent content by Cyclezee

Hi Storapa, I saw your bike this afternoon when I was visiting Graham T, an impressive piece of work :D

The answer to life the universe and everything is 42, but in this instance it is 32 :roll:

Thanks guys, I just ordered the Grinfineon :wink:

Thank you for the link, I see that that the controller specification can be customised, but does anyone have feedback for them?

I'm looking for a 35 or 40amp controller for a Crystalyte HS3540 system which will have a 48v battery and Cycle Analyst V3. Which is the best choice, Crystalyte or Grinfineon?

Agreed, There are similarities between the Cyclezee V3 torque arm and the Amped bikes one, they both do the same job, the biggest difference is that ours are available. :wink:

If the torque arm is fitted correctly as shown in the photo above, the load is transmitted to the chainstay, the Jubilee clips prevent lateral movement of the free end. These have been tried and tested with very powerful motors.

Thank you for your comments Al :wink:

Just to clarify for those like myself who are of a metric persuasion :wink: all parts of the Cyclezee V2 torque arms are 5mm thick, the V3 is 4mm thick.

I have some eZee downloads on my website that may be of use. You can find them via this link http://cyclezee.com/ezee-downloads.html :)

Anyone thinking of buying from Ali Express, this is one supplier to avoid. http://www.aliexpress.com/store/612941 A few months back I bought a 8Fun BBS-01 kit supplied by MW Motor Net via a third party just to try it out. The kit was fine and worked perfectly. Then I decided to buy some more...