Recent content by dashimsta

what happened to this controller?? You had pre-orders on your website for over a year, it never seemed to go in stock and then disappeared? WHY? :/ BUMPittyBumpBump

OKP, that link you posted I had printed a week or 2 ago, and its WAY TOO SMALL! haha, I repeat it is scaled wrong and does not fit the gt2b circuit board by about 25% FYI the scale on the STL FILE IS OFF by an unknown amount and its not a metric to inches conversion. the controller is like 70%...

I never understood why anyone including enertion would want to have a 12mm wide belt. 12mm isnt a standard size, its an oddball 15mm is the width to go with

I'm just going to chime in here, If it is recommended to "lightly sand" the bearing seat, it is not made "less-than-perfect" standard. If the hub is designed for a pressfit of a bearing and you cant easily start the bearing straight, your best bet is to use a handheld deburing tool and...

Why did the development of GT2B controller housings just die after Badwolf V2? We have more we can improve on, such as not having to desolder and move the USB port, ergonomics, overall structure! I've had quite a few V2's crack from use and drops. Anyone have any ideas what it should look...

Honestly, you sound way to inexperienced to be throwing around these high voltage lipo packs. You can destroy them, and they can start a fire. You need to be 100% sure of what youre doing before you begin when dealing with lipo cells. You need a BMS that can continuously output the ESC's max...

Board Length doesn't effect power needed.

Thanks OnLoop! and heres a screenshot from my CAD package, by using a belt tensioner like i have it allows the driving pulley to tension the belt on the top side just enough. For my mount I felt a machined mount was too expensive for the given purpose and the needed accuracy. Instead i...

ONLOOP, I have one of your spacecells and 2 VESC's now, with 12:36 ratio on kegels. I understand we have limited output current capabilities with the SPACE cell so how should I configure my VESC's so that I dont encounter issues or damage your pretty slim battery, LOL! I figure since this is...

buy one of torque boards micro-controllers, you know it works and its obviously small. The generic one does work i have less than an hour run time on it, but it does work nicely thus far, but itll take you 2/3 weeks to get one.

So I've played with mine more and it seems that you press the small micro switch on the receiver until it blinks and MAYBE possibly also press the remote button and it'll bind got mine bound and the first second I goto ride my board I snapped my last belt :( have been riding this belt for 2...

So I got my remote in the mail today, I've powered everything up, but I can't seem to get any control out of the remote. My ESC indicates it's getting a neutral signal but that's it, seems like they aren't bound together but there are no instructions so I'm rather confused:/ This is on a board...

i also bought one of those generic controllers, its in the states already a few days out on arriving will report back also. Torque nice find on those "micro" 2.4ghz remotes. For the last year and a half ive been trying to find a source for said controllers because I always saw them being sold...

I wonder why this thread keeps dying? One would think that a handheld controller is one of the most important parts of an electric skateboard because if it fails you have a good chance of falling and every time we fall we can get hurt. Are there other newer threads on Controllers or is it just...