Recent content by drawk

Again on the LCD provided with this controller - what is the "Power" (labeled '2' in the image) actually measuring? It says "the motor output power in real-time indication" Is this related to amps?

Just documenting more about this particular controller, again for anyone looking for these things in the future. As docw009 pointed out, the 48v version needs to be jumpered to be dual 36v/48v voltage. I have the 36v version, and it operates fine at 48v without any modification - I imagine the...

Going through your posts now. Hobbyking is such a tease - everytime I want to bite on something, it is out of stock. Maybe I should broaden my search horizons. As far as the 8 Ah goes, it is sufficient for my present needs. I moved up to northern Ontario, Canada in a fairly small town...

Thanks again for all the help and insight. I'm starting to get a more comfortable handle of all of this now. Of course, while I was hemming and hawing to make sure they would work in my set up, I missed the sale, lol (I believe they were 50% off at the time of my first post) - I'll keep...

So tbe perfectly clear: I would balance each 6S pack independently, and I do not need to worry about balancing the two different packs 'together'?

So on that - I am doing reading and trying to get myself up to speed. A couple of questions though that I haven't quite figured out with certainty: - This balancer/cell chcker can handle 6S ... is this the type of thing that I would need...

In case someone stumbled across this thread looking for info on the controller, and also didn't receive any documentation, this is how the assist levels function (as set from the display): Long press c button control assistance power on/off, default setting assistance power is on; short press...

One is 12A and one is 18A. Hub. Thanks

Would two of these in serial be sufficient for a 36v/48v controller? It is self-learning and I also have the ability to manually adjust the LVC. https://hobbyking.com/en_us/multistar-high-capacity-6s-8000mah-multi-rotor-lipo-pack.html?___store=en_us

Excellent. Thanks for this.

Thanks for this! That information is no longer on the website, at least as far I could find, so glad you saved it. Yeah, I had gotten a KT controller for this bike, but it was all manner of problems (documented in another thread) and I finally conceded that I think the controller was defective...

Is anyone familiar with the P settings for this LCD? I can't seem to track them down. By holding the arrows I can enter the P setting mode (there does not seem to be a C setting mode?) and there are options ranging from P0 - P4. These do not seem to be the same P settings as my other...

Actually, I think I may try this with an additional 6v or 12v just to confirm my suspicion that things are locked in at 15mph.

Not familiar with it. Picture of the controller?

Revisiting this older topic - As it turns out, it seems to me that the replacement controller was simply defective or damaged. I never did get the throttle working properly with it (the throttle that was supplied with it, as well as another one that I tried with it) and the display panel still...