Recent content by guiga

Hi , the sprocket is a lill bite wider and yes is tapered but it works good enough. Its from a UK store , search for MightE. Some other good stuff there also.

It runs. Had to turn aceleration ramp down to 20 in kelly controller cause was way to wild , i just couldnt ride the bike witout spinning and lifting front wheel from start lol. Just need some minors astetics to be finish.

Here my shtty schematic lol but good enough for you to have a ideia how it works. This group is for sharing and help so i will do my best.

Its alive! Had to change front suspension , dint like the pit bike suspension. Have install a contactor and a pre charge system. BMS display had a small fall but still works.

Been busy and also waiting for new soldering iron . 200w. Still more parts to come.

Thanks for the info my friend. The controller i got is the kelly kls 7250 n witch is 380amps probably phase amps. Been tweeking the controller and is very responsive now. I also got a asi 8000 from other build but cause the asi was from alan , got no credentials! What do you think about this...

Start building the pack. Lithium aint joke so guys be carefull.

Got 200+2 cells for 990,79eur with postage for a 20s10p (2880w nominal)

Batteries fron Nkon.nl are here. Tested voltage and 160cells come with 3,47v and 40 cells come with 3,46v. Very good quality.

Hey hope you bether. Hows the project going? I love that magnet kill switch , is NC or NO when magnet in? Trying to figure out the wiring.

Hey hope you can have some ideias from the build. I use all the bolts , at beginning i did mistake when doing the holes for the motor support and had to drill new ones lol. The motor is bolt with a aluminium plate in one side and the own motor bracket is bolt in midle of frame , hard to see. I...

Hi there , will be a 10 front sprocket wit 59 tooth rear sprocket so will be a 1x5.9 gear ratio on a 17 inch wheel. What you guys reckon? bike under 70kg with a qs 138 4kw motor , kelly kls 7250 400 phase amps and 20s10p 21700 samsung batteries. I notice that the controller only comes with a...

Some progress. Had to adapt wheels suspension , etc. Not easy task but have to be done and voila!

Hi , seen the videos and they explain very well all the basic setup. Muchas gracias

Thanks thats good info.