jocoman

Ok. progress...maybe I have it running without stopping. I think it had a poor field connection. It is kinda of noisy and draws 12 amps...

Unfortunately C2 can only toggle between 0 and 1. No other settings. Doesn't seem to make any difference if set to 1 or 0. Txs

Yes. the Grin video is what inspired me. i just didn't want to buy a $500 controller.

Thanks. I'm close to giving up. see this thread...

Here is something else that is interesting; In the diagram above, the start diagram produces a a smooth rotation but does not go very...

I don't think the battery is sagging. BTW where should i be measuring current? at the battery or at one of the stator wires? txs

Update: At the super fast setting, the motor only runs for about 3-4 seconds and then stops. This may be the correct setting, but it...

The motor is not laced to a wheel at the moment. I am bench testing things, so it is unloaded. I would say the battery can peak at 20...

That's the problem. I have tried all the combinations (36 in total) (several times) I either get super fast, or super slow or it just...

Hi Folks. I hope someone can sort me out. I took a 350w Bionx motor and removed the internal controller. It is now just a plain direct...