K
Reaction score
0

Latest activity Postings About

    • K
      kudos replied to the thread Are Cell Spacers Necessary?.
      You make a valid point. Has anyone used cell wraps: https://www.fogstar.co.uk/products/21700-pvc-wraps How loose are they initially...
    • K
      kudos replied to the thread My "Mark 2" solar trailer.
      Really interesting project good luck. By the way you can get a ' buck-boost solar controller' and cheap too, I have one which I had...
    • K
      Where did you get those honeycomb style 21700 cell spacers from?
    • K
      For my next battery build I’ll be looking to stuff as many cells in an EEB frame as possible. I used the standard 21700 cell spacers in...
    • K
      kudos replied to the thread First Hub Wheel Build.
      Ah, that’s two throttles one controller, I’m looking at the reverse.
    • K
      kudos replied to the thread First Hub Wheel Build.
      Interesting, can you link to the review?
    • K
      kudos replied to the thread First Hub Wheel Build.
      All sorted now, using two TAs both of which I filed down to perfect fit the axle flats. My next question is around using one throttle...
      • 64E62A23-53ED-4C40-A6FF-E4B775A4C540.jpeg
      • 64BFA705-C5F8-4192-89BC-478727D3960D.jpeg
    • K
      kudos replied to the thread First Hub Wheel Build.
      Well the new TA turned up, the flat to flat distance is stated as 10.17mm which I suppose would be alright for an axle with 10mm flats...
    • K
      kudos replied to the thread First Hub Wheel Build.
      So I almost had a catastrophic failure with the new wheel on first test. I installed the new motor on a hard tail MTB I have using a...
      • TA.JPG
      • TASpin.JPG
      • TASpin2.JPG
    • K
      kudos replied to the thread First Hub Wheel Build.
      I’m a total convert to hydraulic brakes. I can’t believe I’ve spent so many years mucking around with avid cable brakes, so many hours...
  • Loading…
  • Loading…
Top