Recent content by MrYetiMan

Based on a full charge x2 Batteries = 4.2 Miles And dropped to 2nd bar but still had juice left could get atleast 5 miles min out of the two packs if anybody else is intrested in knowing.. :D

Okay i understand thank you for the information mate. So this should be fine for charging 6x Batteries (Parallel) http://www.ebay.co.uk/itm/Lithium-ion-Batteries-Charger-36V-Battery-charger-Parts-6A-chargers-Quiet-charge-/262494994143?hash=item3d1debbedf:g:mtEAAOSwGIRXa7xh Linking them up...

Thanks for the info. We had a feeling it had a bms because of the shape under the wrap. And what charger would you recommend ? Im not very familiar with batteries or charging im quiet the amature. So what you're saying is i can link them up together and charge like a normal 36v?

How to charge These batteries parallel :?:

the segway batteries are really good actually powerfull little things :mrgreen:

Hey Forum So my buddy recently got a E-Scooter it was alrite but the batteries died so fast.... Anyway we had two old segways we decided to take the batteries out and link them up parrelel and wired them temporarly into the scooter it works so well!! we both jumped on it last night it lasts...

if we use a 60amp fuse will it stop it geting black marks on the fuse and stoping the board like the problem this guy had ? I Have to say since i changed fuse and stoped it rattling around in the case my problems stoped.

Ahh good stuff man im happy that this solved you're problems happy you are now riding :D

The fuse sits at the top of the board behind the white spacers you can pull it through the top and replace the fuse easly.

Like this http://www.darvex.com/store/pc/Stinger-80-Amp-MAXI-Fuse-61p183.htm

a Car Garage should sell it.

It's a 80AMP Car fuse, Take the old fuse out you will probaly notice small black burn marks on it if it did the same as mine... Replacing with a new one seemed to fix the problem for me make sure you secure the fuse with some spundge under it to stop it shaking i beleive this is what fks up the...

Hey Guys i have a benchwheel and had some simular problems this can happen because of the Fuse at the top of the board get a new fuse and put somthing like a small peice of spondge and tape it so it does not rattle around seemed to fix it for me.

Anybody can shed some light?

I Have also run voltage tests and it holds the full 25.2V so battery is not the issues eather and i have tryed with one motor and then the other motor singaly but no luck