Looks similar to the one I bought at 13A Type 2 to schuko.
Not sure why more people haven't cought up to it yet but this thing allows for example charging ebike from certain street EV chargers (can find a map on certain EV charging apps). I have used it on podpoint chargers in London and gone...
Ebay auction here
Selling this as used, comes with original key.
1 meter cable length
Used to charge my ebike from street EV chargers (Type 2 -240V comparable). Can be used to power anything that works from a domestic 13amp 240v socket.
Following is the manufacturer description:
(Full...
Live eBay auction here
I am selling 13 used EIG 20ah cells and a 14s BMS(30A charge/discharge)
Average 16 mohm
The cells have been unused for over an year and have been used for an ebike setup before 4 cells of the 13 were separately used for lighting setup.
Always used the cells with BMS...
Link to live eBay auction here
This is a 13s1p pack with 20AH EIG South Korean cells. Cells voltages are mostly 3.77Volts with a few cells at 3.76Volts and 3.75Volt.
The cells have always been operated within the recommended charge/ discharge voltage range of between 3.4volt and 4.1 volt per...
Grin support came back to me and unfortunately the Baserunner has no reverse polarity protection.
They were very nice and offered a discount if I decided to buy a replacement but that's unlikely as I am going to use the ebike with OEM controller instead.
I really appreciate all the support and...
Sorry AW, yes you did say it and yes there are displays for CA3.
I wouldn't want to drill, compromising the structural integrity and can appreciate when Justin did drill to install a torque sensor on the RadRover he mentioned this fair and square -" at your own risk and warranty voided".
Well...
The bike works and I couldn't notice a difference in its performance after putting back the Chinese original controller and components (display, lights etc).
I am waiting on Grin to confirm if the BR has reverse polarity protection but even if it does something was not working well in terms of...
On topic
This is where the smell of something burning comes through. The female connector has a strong smell and black residue on one of the pins. The connectors were joined outside the frame and that's where the magic smoke appeared. The controller from inside the E-bike frame "smells fine" as...
I still can't believe that I managed to smoke the controller after all the work I put on this conversion! Smoke means damage and doubt in the back of my head ...new controller.
It's reassuring to know that CA3 is capable of being used with custom display through serial and it's baffling that no...
Actually I think what I wrote above may not be necessary true.
You may be able to use the same cable if it's not wired like mine. In my case the throttle was wired together with the ebrake. In your case you may have separate ebrake and throttle signals which if it is you may be able to activate...
I actually think that this particular cable is not going to make a difference for connecting the lights.
How it usually works is that the controller provides on one of the pins Gnd(0V) and when you press the brake lever it connects the second pin to the first pin. The controller knows that the...
I recently wired a similar kit on my ebike.
https://www.ebay.co.uk/itm/364104744139
In essence what you need to find is which pin is ground (GND) and which is V+ (after the power on/off switch but if not battery + wire can be used)
That will give you headlight/horn (if included) rear light and...
Very well put on Grin components vs generic stuff. Glad the protection is there and I see no damage in cabling.
I am doing an upgrade thinking I would get a better ride. Those were the expectations but in reality if I could do something different I would probably get a flipsky 75100. They also...
What could happen if I wired the polarity of the battery to the Baserunner controller wrong?
I was transitioning from test wiring to properly terminated connectors today and unfortunately made a big mistake.
When I connected and switched on the "magic smoke" came out and I switched off...