richj8990

The mid-drive LCD5 display will not show watts for the mid-drive, but for the hub drive, the LCD when under imitation torque would...

My thought was aren't they making 135mm dropout rear hub motors. That supposedly fit. If they fit, great. I jumped to a different...

I don't understand --- I thought Grin made a standard 135mm dropout geared rear hub. And it still can't fit? I dunno how much you got it...

https://endless-sphere.com/sphere/threads/how-to-make-a-non-frewheeling-crank-for-gng-gen1.61288/ Last year I bought a GNG Gen1 BB...

Sorry I cannot paste a Spanish translation on here. Yes, but only on steep pavement for something long. Feels about 700W power, not...

I just did a mid-drive conversion, see e-bike build subforum. I was only asking about the thru-axle hubs if I threw many hands in the...

It affects throttle response too. That's why I'm going to turn it off later after I put the battery back on for this new build in the...

Or...most chainrings only last about 1500-2500 miles even without electric power going through them. Add additional power/torque on a...

Finally got everything to work. I wanted to do a test ride up a 12% fire road near my home but decided to instead clear some overgrowth...

For now I'm going to use the stock square-tapered crankset that comes with the kit. BTW this crankset monstrosity including 4 chainrings...

New controller / display worked (throttle). I'll try to finish everything up and test ride by Monday. Seems like the unchained direct...

I copied and pasted a review of a different customer's experience. I believe it's brushless. Just got the KT LCD-5 in the mail, will...

I'm waiting on a new KT controller and display (along with KT PAS and throttle). Will update later. These kits, either side mounted in...

48V450W mid drive motor kit with LCD&PAS for ebike 3speed brushless gear motor | eBay $470 USD including shipping, and I'm about to...

Never used them, threw them in the trash when I got the hub motor kit. Never had to use them, because if I did throttle and wanted to...