Recent content by shawn_1976

Batteries Expert Pickering has 12V/24V powered fridge 905-831-5068 batteriesexpert.com

I have an AXE 7245 with a 22 cell li-po pack 60 amp. The controller will turn on for a split second and then shut down when fully charged. So I charge my cells to 4.10 volts per cell. Works great!!

What size are you looking for. I can get the tabs

.

Thats over $2 a watt!! I can sell you Canadian Made Sharp panels for $1.30/watt. Sharp Panels 235 watt $305 each min 2 panels. Thats not even on sale...lol. For larger orders pm me

I used a 40 pitch gear on the motor, a 428 gear on the rear with a 40 pitch chain. It seems to work well. Only time will tell.

I was thinking of doing this. How perfect do you think it needs to be? Did you have any premature chain wear after? The gears are so close, only need a little material removed

I have mounted a D&D motor to the kart. I have an Alltrax 72V 450amp controller. I am having issues with the chain. I measured the chain that came with the kart, it had a half inch pitch, check the info half inch pitch is #40. So I bought 40 pitch gears. Chain didnt work. After some research I...

http://www.youtube.com/watch?v=x-f2LWHo2DE

If you ran two motors in series with a 90V battery that would be 45V at each motor..Correct? Would there be away to shut one motor off on the straight aways and apply full 90v to a single motor for peak speed? Or would the other motor put to much drag on the system?

This is what Steveo and I have to work with

Yes, depending on motor and battery size

Yes, the bare frame

It's about 16-17lbs with no fork, no shock, no crank

You will destroy them very quickly