Recent content by sun444fun

Problem solved! Discribtion: In the manual the rated phase current is shown as 50A , thats just 50% of the factory setting (100A). The Setting for the max phase current is 150A. In this case I coose 135A. Thats powerful enough to me. Remaining Issues of Sabvoton SVMC 7245 Controller: --> why...

Update2: I found a signifficant parameter --> "rated phase current" -->factory setting =100A , Manual velue=45A (max phase current=150A). The Test: I run the bike about 2m at max acceleration and read the kW value on the CA-display. By the way I should mention that the e-brake throttle...

Update: A factory reset with the newest PC Software as well as a Hall angle Test, looks promising. But I didn't make any changes , like "e-brake throttle" (I love this function) so far. I gues parameter changes at the Function setup page might be the key for my issue (-->Power loss when...

Hi e-bike comunity! I have the problem that my ebike (Sabvoton SVMC 72045 + Cycle analyst V3 + 3kW-Hubmotor) does not provide the full power all the time. After about 10 min, the Power response dropps signifficantly. Crossing a street gets riscy because of poor power at low RPM or start driving...