Recent content by thisrealhuman

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR2.TRC1.A0.H0.Xmountainbike+rear+shock.TRS0&_nkw=mountainbike+rear+shock&_sacat=0 Something like these? They make child size mountain bikes now that probably have even smaller shocks.

I recently fried my GT2B receiver so in a pinch, I bought a TX/RX combo from a local shop. http://www.hobbypeople.net/index.php/lhs-electronics-spark-3-pistol-grip-car-radio-2-4ghz-wp-rx.html The Spark3 has two knobs on top for CH2, EPA (end point adjustment, had to google it) High and Low. The...

Neat idea, but if you don't want flex you will need some really solid wood. I bought an Apex Carbon years ago made with fiberglass and wood and the thing is a trampoline. https://www.youtube.com/watch?v=TkgLFrtvwJU 1:47 is the construction explained. Are you planning to add concave? It might...

My toes do go numb sometimes. On a smooth road ill be numb after a mile of 15mph or more, on a rough road i tend to shift around more. My big wheels will be much nicer, they are the reason i went 245kv and 1/3 drive ratio. Im going to a wide belt before i get to those.

Thanks, that will work out nice for my extra lights as well, and much cheaper than my current ideas. And thanks again, it makes me happy. the green on top is flourescent, I have blacklight leds that i'm putting in my badwolf controller so the top glows at night. I ride in the bike lane, 24mph is...

I'm using 10s, the BEC pro is good for 12s. It came with a set of wiring diagrams, one of which is to connect to only ONE of the lipo packs, but I didn't want to run extra wires and also I was worried it would throw my packs off balance. The other BEC I burned was a Dr. Mad Thrust Dual output...

First, the obligatory thank you to everyone in this forum. I've been lurking and learning for probably three years and I wouldn't have made it this far in my build without you, so thanks! Build Specs: 2x 5s Lipo Zippy Compact 5800mah (used in series, charged in parallel) 120A K-Force Opto ESC...